I am having a hard time inserting my Stelo Glucose Biosensor, what do you recommend?

If you’re having trouble inserting your biosensor, follow these steps to ensure proper placement and application:
  1. Prepare for insertion
    • Wash and dry your hands.
    • Choose a site on the back of your upper arm with enough fat to avoid muscle and that is not likely to be bumped, pushed, or slept on.
    • Clean the site with an alcohol wipe and let it dry for at least 10 seconds.
  2. Insert the biosensor
    • Grab the applicator and unscrew the cap. Do not touch inside the applicator.
    • Press and hold the applicator firmly against your skin until the clear safety guard is pushed in.
    • Press the button, then remove the applicator.
    • Rub around the patch 3 times, then press on the biosensor for 10 seconds to help keep it in place.
  3. Apply the overpatch
    • Carefully pull off both clear liners one at a time, avoiding the white adhesive area.
    • Use the tab to place the overpatch around the biosensor (you may need to use a mirror).
    • Rub around the overpatch.
    • Use the tab to peel off the liner, then rub around the overpatch one more time.
You can also find these directions in the app to guide you step by step.
Ask a friend, family member, or healthcare provider to help insert your first Stelo biosensor and overpatch.
Stelo biosensor insertion tips:
  • Look in a mirror while positioning the applicator or applying your overpatch.
  • Try reaching under and over your arm to find out which is more comfortable.
  • Press and hold the applicator firmly against your skin until the clear safety guard is pushed in. Then push the button on the side of the applicator.

MAT-4573

Related articles

Where do I insert the Stelo Glucose Biosensor?

Insert your Stelo glucose biosensor on the back of the upper arm, and make sure to change your insertion site with each biosensor to avoid skin irritation.
  • Read more

How do I remove and replace my Stelo Glucose Biosensor?

Changing your Stelo glucose biosensor is easy - follow the instructions in this video to remove and replace your Stelo with a new glucose biosensor.